Vertical Diaphragm Assembly Machine
Specifications:
Working table overturning angle |
±180° |
Working table load capacity |
1500 kg |
Work-piece size |
300~1200 mm |
Clapboard thickness |
20-80 mm |
Overturning speed |
1.5r/min |
Motor power |
0.75 kW |
This equipment is special used on the box beam line .It is composed of support part ,overturn table , positioning plate , pneumatic press part , overturn motor reducer ,gas circuit and control system .
The overturn table can turn through bear basement line, which makes the work-piece have suitable welding position and angle.
Positioning plate can position different size of baffle plate .After positioning; the work-piece will be clamp by four group pneumatic press part.
Gas circuit system is composed pneumatic three-joint part, electromagnetic and pipe circuit .Supply the power and direction control for pneumatic press part.
There have control panel on the control box, it can control the forward/backward turn of overturn table and the press/loose action for pneumatic press part.