H Beam Horizontal Production Line
This is a special line used to assemble and weld H beam. Compared with normal vertical line, it has the advantages of higher productivity and less deformation, and is suitable for producing light H beams. The line is composed of end assembly machine, front welding machine, overturning machine, back welding machine, and their conveying roller. This line can make H beam assembly, welding, overturning and transmission.
1.When assemble, just needed to do spot welding atH beam end, then can go into the welding process, welding machine will re-position the three plate, thus increase assemble speed.
2.H beam is put horizontally (web is horizontal and flange is vertical), and beam will move during welding, and can weld two seamsat the same time to reduce deformation caused by welding heat.
3.Machine can equip AmericanLincoln DC-1000 welders, or other Chinese brand of weldiers, which are usingsingle arc twin wires welding technology, wire diameter is 1.6mm, and welding speed can reach 1200mm/min average, the welding seams are well formed and beautiful appearance.
4.Due to the significant improvement in automation level of this production line compared to traditional production lines, it can reduce the labor intensity of workers and operators. This production line only requires 4-5 operators to produce normally.
5.It is suitable to weld variable cross section H beam ≤15°
Specifications:
|
Web height |
250~1500mm |
|
Web thickness |
4~16mm |
|
Flange width |
150~500mm |
|
Flange thickness |
5~20mm |
|
Work-piece length |
4000~15000mm |
|
Assembly and welding speed |
0.3~1.9m/min |
|
Above are our standard model, it can be designed and manufactured according to customer’s request. |
|
Related Products
.JPG?x-oss-process=image/resize,w_100/quality,q_100)
